How much break time on Step 3 day 2?

On USMLE Step 3 Day 2, you get a minimum of 45 minutes of break time, which can increase as you finish early, with breaks taken between the 6 multiple-choice blocks and the clinical case simulations (CCS), with extra time from completing blocks or tutorials faster adding to your total.

How much break time do you get on Step 3 Day 2?

The second day also includes a 6-minute CCS tutorial. This is followed by 13 to 14 case simulations, each of which is allotted a maximum of 10 or 20 minutes of real time. A minimum of 45 minutes is available for break time. There is an optional survey at the end of the second day, which can be completed if time allows.

What is the day 2 breakdown of Step 3?

Day two of Step 3 is a nine-hour testing session, with a 45-minute minimum break permitted. On day two, you will answer 180 MCQs that are divided between six 45-minute blocks of 30 items each. There are also 13 case simulations on the second day, for which you will be given 10-20 minutes each.

What time does Step 3 day 2 end?

If you skip the tutorial/finish it early, you receive the unused time as extra break time. Step 3: Day 1: 50 minutes for 6 hours MCQs (~ 7 hours total) Day 2: 57 minutes for 4.5 hours MCQs + ~3.5 hours case simulations (~ 9 hours total)

How many breaks do you get on step 2?

Test-takers have a total of 45 minutes available for personal breaks, and any time saved from completing sections early can be added to your personal break total. You are allowed a total of six breaks during the exam.

USMLE - "What is ideal way to use my block/break time on exam day?"

What is 75% correct on step 2?

Getting 75% correct on Step 2 CK (Clinical Knowledge) is generally considered a very strong performance, often placing you well above the average (around the 75th percentile or higher), translating to a strong 3-digit score (likely in the mid-250s or higher), making you a competitive applicant for most specialties, though top-tier programs in highly competitive fields might look for even higher scores.
 

How many blocks are on step 3 day 2?

Step 3 Day 2 is a 9-hour test day. It has 6 blocks of 30 questions each, followed by 13 cases. You will encounter a combination of multiple-choice questions and computer-based case scenarios. Step 3 Day 2 tends to emphasize diagnosis, management, and medical decision making.

Is 60% enough to pass Step 3?

However, examinees typically must answer approximately 60% of questions correctly to achieve a passing score. For Step 3, your performance on the case simulations will affect your Step 3 score and could affect whether you pass or fail.

What score is 50% on step 2?

A 50% Step 2 score (USMLE) typically means scoring around 250, placing you at the median (average) for matched U.S. MD seniors, which is solid but may require strong application components for highly competitive specialties; it's a passing score, but scores vary by specialty, with some (like Family Med/Psychiatry) having lower averages and others (Surgery/Derm) much higher.
 

Is 225 a good step 2 score?

The mean Step 2 CK score across all applicants hovers around 249. The minimum passing score is 218. Applicants who match tend to score higher than those who don't, regardless of whether they are U.S. MD seniors, DO seniors, or international medical graduates (IMGs).

Do most people take Step 3 two days in a row?

They do not need to be consecutive, and adding the days in between can help you recharge for Day 2. The two test days differ in content and structure, so here is a visual overview of each one. For the complete content breakdowns, check out the USMLE site here.

Is Step 1, 2, or 3 hardest?

Step 3 had a slightly better pass rate, with 97% of US/Canadian examinees and 87% of non-US/Canadian examinees passing. Step 2 had the highest passing rates for both US/Canadian students (98%) and non-US/Canadian test takers (88%). This data suggests that Step 1 was the hardest exam to pass.

What month do most people take Step 3?

Most interns will strive to complete their Step 3 exam by the end of their first year of residency. In fact, GME requires that all residents register for Step 3 by the 12th month of their training and must take and pass the exam within the first 18 months of training.

What is the breakdown of Step 3 Day 2?

Step 3 Day 2: Advanced Clinical Medicine (ACM)

The second day is a 9 hours long exam consisting of about 180 MCQs and 12 CCS. It includes a 5-minute optional tutorial followed by 180 multiple-choice items split into 6 blocks of 30 items.

What percent of people fail Step 3?

The USMLE Step 3 fail rate is low for first-time takers, around 2-3%, with pass rates over 97% for US/CA MD graduates, but significantly lower for repeat takers (around 73-76%), highlighting challenges in re-passing. Pass rates for International Medical Graduates (IMGs) are lower, with about 91% passing initially compared to 97% for U.S. grads, and repeaters even lower (64% in 2022). The exam is generally seen as passable with good preparation, but scores can drop from Step 2, making test-taking skills crucial, and the passing score was recently raised to 200. 

How many days between Step 3 day 1 and 2?

You can schedule and take your two testing days on consecutive or non-consecutive days. However, Step 3 Day 1 must be taken first, followed by Step 3 Day 2. Your exam days may be no more than 14 calendar days apart, and you must schedule both test dates with Prometric at the same time and at the same center.

What score is 75% correct on step 2?

Getting 75% correct on Step 2 CK (Clinical Knowledge) is generally considered a very strong performance, often placing you well above the average (around the 75th percentile or higher), translating to a strong 3-digit score (likely in the mid-250s or higher), making you a competitive applicant for most specialties, though top-tier programs in highly competitive fields might look for even higher scores.
 

Is 74% on UWorld good?

Based on historical data, a student with an average points score of 70% and earned a “High” or “Very High” result on a Self-Assessment Test would have a 99% likelihood of passing the NCLEX-RN.

Is 240 a bad step 2 score?

USMLE Step 1 is reported as pass/fail, but you will receive numerical scores for Step 2 CK and Step 3. A good USMLE Step 2 CK score is between 240-260, with 256 or higher being competitive for first-choice residency programs.

Is USMLE Step 3 the hardest?

No, USMLE Step 3 isn't usually the hardest exam overall, with high pass rates, but its difficulty lies in balancing it with residency, mastering the unique Clinical Case Simulations (CCS) software, and managing the sheer volume and intensity of two full days of testing. While Step 1 covers foundational sciences and Step 2 focuses on clinical knowledge, Step 3 tests the practical application and management of patient care, often feeling challenging due to time constraints and the need to refresh older material.
 

Is 260 a good step 2 score?

240–250 → Solidly within the average range; competitive for many core specialties. 255+ → Above average; strong candidate for competitive programs. 260+ → Exceptional; makes you stand out even in the toughest specialties.

Is 50% of UWorld enough for Step 3?

I recommend completing the entire QBank for better preparation, as UWorld questions closely mirror those on the actual exam. However, if time is limited, I suggest completing at least 50% of the QBank.

Can I retake Step 3 if I fail?

You can take Step 3 up to three times within any 12-month window. Your fourth attempt (and any after that) has to be at least 12 months after your first try, and at least six months after your most recent one.

Is Step 3 similar to step 2?

While Step 2 CK focuses on clinical science principles and patient-centred skills in a supervised setting, Step 3 extends this assessment to applying knowledge in independent patient care situations. Multiple Choice Questions: Both exams include multiple-choice questions (MCQs) as part of their assessment.

How to take breaks during NBME?

Taking a Break

You will be escorted on all unscheduled breaks. Only one examinee will be allowed to leave the testing room at a time. Click the "Pause" button at the bottom of the screen.