Is it OK to use rubbing alcohol on whiteboard?

Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.

Does rubbing alcohol damage whiteboards?

Avoid cleaning your whiteboard with products containing alcohol, ammonia, bleach, or any harsh chemicals. These substances can damage the whiteboard surface and reduce its lubrication over time, resulting in whiteboards that are difficult to clean.

What is the best thing to clean whiteboards with?

Again, a mix of isopropyl alcohol and water is the best solution to clean a whiteboard, but various other options work just as well. Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner, and peroxide also work well.

What not to use on a whiteboard?

What damages whiteboards?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

What's the Difference Between Isopropyl Alcohol and Rubbing Alcohol?

Is rubbing alcohol the same as isopropyl alcohol?

Isopropyl alcohol is pure alcohol and is a colorless liquid with a musty, sharp odor. There are no other ingredients in a bottle of isopropyl alcohol. By contrast, rubbing alcohol contains isopropyl alcohol among other ingredients, such as water. Most rubbing alcohol brands contain 70% isopropyl alcohol.

Does Magic eraser ruin whiteboards?

No, a magic eraser will just create more abrasion on the surface. The dry erase marker trick works because of the alcohol inside the marker. Therefore, rubbing alcohol is probably the best bet, however, it will break down the surface of a traditional board over time.

Can you use hydrogen peroxide on a whiteboard?

Hydrogen Peroxide

To use it for cleaning your whiteboard, pour a few drops onto a clean cloth and swab the board until the markings have gotten cleared. For areas with persistent stains, you can rub a more generous amount of hydrogen peroxide on those spots.

Can you use Windex on a whiteboard?

Windex: I found Windex to be a very effective cleaner. By just spraying a small amount onto a microfiber cloth, you can easily remove stubborn staining while cleaning the surface. Mild Detergent & Water: I used a drop of Dawn dish soap and water on a microfiber cloth.

Does hand sanitizer ruin whiteboard?

Most hand sanitizers contain alcohol, similar to isopropyl rubbing alcohol, but they often have other additives such as gels and fragrances. Therefore, hand sanitizers may not be the ideal choice as they can leave residues or cause staining on the whiteboard surface.

Can you clean a whiteboard with alcohol wipes?

To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.

Are Clorox wipes safe for whiteboards?

White Board Hack: Don't Use Clorox Wipes.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

Can I clean board with alcohol?

Isopropyl alcohol is a great circuit board cleaner because it is cheap, widely available and evaporates quickly. Compared to other cleaners, alcohol contains fewer chemicals. It is also relatively non-toxic. Isopropyl alcohol used to clean PCBs should be 90% grade or better.

Can you use Dawn on a whiteboard?

Spray a small amount onto a microfiber cloth before use. Mild Detergent and Water: Dawn dish soap works great with a bit of water to remove residue and built-up oils.

How do you rejuvenate a whiteboard?

To fix both of these problems, put some isopropyl alcohol on a paper towel, and wipe down the entire board. Switch paper towels as it starts getting dry or as it fills up with stains. Repeat as necessary until the entire whiteboard feels smooth to the touch.

How do I remove ghosting from my whiteboard?

Dampen a cloth with the alcohol and wipe the board in a circular motion. You may need to repeat a few times to get everything off.

Will vinegar clean a whiteboard?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Can you use acetone to clean a whiteboard?

Only use erasers specifically designed for white boards. Do not use abrasives on white boards or you can damage the surface. Do not use Magic Erasers or they will scratch the surface. Do not use acetone or mineral spirits to clean whiteboards.

Why not to use magic eraser?

Magic Erasers are abrasive and shouldn't be used on wood or any high gloss surface, including countertops, because they can dull the finish.

Does bleach work on whiteboards?

Clorox with Bleach: While we liked that you could spray the solution directly onto the whiteboard, it dripped down a lot, so you had to wipe it up right away. The Clorox seemed to perform best on the traditional whiteboard surface (not paint or film), and when the staining wasn't too severe.